Home Repair : How to Replace Cracked Tile
Home Repair : How to Replace Cracked Tile


I’m Ryan Parker, with Parker Home Renovations
in New Braunfels Texas. And today I’m going to teach you how to replace a cracked tile.
Many people have cracked tiles in their houses, and usually the main cause is you get hairline
cracks as the house settles, and you get hairline cracks in the slab, which tends to crack the
tile. It’s usually nothing to be alarmed about, but today I’m going to teach you how to fix
that cracked tile if you need to. You are going to need quite a few tools. The first
thing you’re actually going to need is, you’re going to need a grout scraper, this is to
scratch out the grout joints around the tile so you can actually take it out. Then you’re
going to need a pry bar, you’re going to need a hammer, you’re going to need safety glasses.
Make sure you wear safety glasses, because when you’re pulling out a tile, or breaking
a tile loose, it’s just like shavings of glass, it can get stuck in an eye and really cause
a lot of damage. And you’re also going to need a trowel, to trowel the new thinset on.
You’re going to need a product called thinset, you can get it at home improvement stores
that sell tile stuff, and you’re going to need a type of grout also; you pick the color.
The first thing you’re going to want to do is, you’re going to want to scratch all the
grout joints around that tile, you want to scratch them back down towards the grout,
it’s basically not in the joint anymore, all the way around the tile. Then you’re going
to want to take a hammer, and you’re going to want to hit the tile pretty hard in the
center, try to break it up a little bit. And then take your pry bar, and you want to pry
in between two tiles if you can, but be careful not to chip the tile next to it. But try to
get some of those pieces out that you just broke. Take them out, put them in a bucket;
make sure you use gloves. Once you get all that out, you’re going to want to scrape the
thinset back down to the concrete, so scrape all that out of there. Then take your trowel,
mix up some thinset with water, and its got to be a paste type texture, and you want to
trowel the thinset back down, take your new tile, stick it on the thinset, press down,
and kind of move it around a little bit, hit it on each corner, make sure it adheres very
good. Then you’re going to want to take your grout, mix it up like a paste, take your grout
float, and just smear the grout into the joints until the joints are nice and full. Then you
can take your sponge with a clean bucket of water, and you want to wring out your sponge
in the water, wipe the grout joints. Usually you’ll want to do one pass per side, and then
wring it out again; one pass per side, wring it out again, until you get it nice and clean.
And that’s how you change a cracked tile. If you have any other questions you can contact
me at, parkerhomesrenovations.com

84 thoughts on “Home Repair : How to Replace Cracked Tile”

  1. inspectrgajit says:

    Thanks for this video. Really appreciate the step by step scenes while you explain! You should have your own show! Real pro!

  2. colin wilkie says:

    cheers pal!

  3. Jarod Morrison says:

    eau9999, I've pulled up tile that's been set for 5 years that pulled up easier than the one on the video. Most of the time if you're replacing a tile its because its already cracked and coming up anyway. This video is more about demonstrating, not showing a real life situation.

  4. clodyan78 says:

    che colla di merda

  5. Edwin Clemencia says:

    why dont you do it yourself..if ur better

  6. ATAHUALPA867 says:

    Hey , do you wipe it off right after with water or wait a little longer for the grout to sink in?
    Thanks. good video.

  7. Kevin Naderi says:

    thanks.

  8. Gary Williamson says:

    he dont have to, expert village already did that clip.

  9. Alisa Kaiser says:

    great seems simple:)

  10. UsWeirdPeople says:

    thanks for your help

  11. Jeff Cannon says:

    Excellent video! Thank you very much.

  12. mcb0613 says:

    what is the tool you use to remove the old thin-set (at 1:36).. it took me ages to remove my old one.. is it essential to remove it all, or does it not matter?

  13. chad w says:

    What's the name of this tile and where can I buy it?

  14. OpenComments says:

    @DataRelater
    Scientology doesn't get criticized for what they believe per se. Scientology is criticized because of the way they operate.

    Scientology has a lot of enemies because they're greedy, they defraud their members, they bully and harass their ex-members & critics, they separate families, their RPF labor camps, their deceptive front groups, and corruption, etc.

    Scientology definitely deserves the attention that they getting. They brought this mess upon themselves.

  15. moosey368 says:

    @mcb0613

    Sorry it's 6 months after you've already posted…but, that tool is just a 4" floor scraper. Sold at almost every hardware store and most definitely at lowes or home depot. It has a razor blade that is ideal for pulling up old thinset or paint on the floor.

    As for removing all of the thinset, yes! If you want your replacement tile to sit level with the other tiles you'll need to remove the old thinset. Once you pull up the cracked tile the old thinset has no value to you anymore as

  16. cromerbeach says:

    think i'll call the tile guy

  17. cromerbeach says:

    your grout is so dark

  18. SamWise says:

    @Blythep1 You are in idiot Blythep1…no one out there would need anything more to know how to replace a cracked tile. I'm sure if there's a sesame street version out there for you somewhere…

  19. TriMoot says:

    Great job, clear and concise. I'm replacing about 8 tile because the installer didn't have a clue as to what he was doing. So sad. Thanks again.

  20. TheChemist187 says:

    @cromerbeach For a white trash family like that you have to have it dark.

  21. cromerbeach says:

    @TheChemist187 I'm guessing you have a very low IQ and probably no frineds

  22. CainPire says:

    Great video. Many thanks!!

  23. Joshua Farnsworth says:

    You didn't mention that grouting should wait until AFTER the original thinset has dried & hardened…at least overnight.

  24. pluckerpick says:

    Its is if you have an unexposed edge to lever the tile off, unlikely to see that example in real life

  25. All Tile says:

    Looks good, but you got to use more expansive thinset next time (Mapei Kerabond Keralastic or Customs Megabond). It will not come out that easy.

  26. pineneedle2000 says:

    I guess tinset is adhesive???

  27. Orrphan says:

    @joshuafarnsworth not necessary to wait for thinset to dry if only replacing a couple tiles. I only use speedset and have grouted immediately after.

  28. Orrphan says:

    @Blythep1 You are exactly right. very unrealistic.

  29. Orrphan says:

    Not detailed enough. Needs to explain why you need to remove the grout, if the grout is not removed it will transfer the hammer force to break adjacent tiles. You should also never use a hammer (like he shows briefly) or any other tool to try to lever out a tile using a good tile next to the broken one. I know it was a sample set-up, but it was funny how he doesn't mention that the grout and thinset will not be coming out as easy as he showed. that grout looked like it was only a few hours old.

  30. ? says:

    Cut an X in the tile with a diamond grinder wheel then hit it with a hammer. Much safer!

  31. Stodesta says:

    Shocking example bro

  32. Lulubelle says:

    Lowes has a $5 kit of tools to do this.

  33. Dorlene Tony says:

    This video helped me out a lot. Thanks

  34. bryede says:

    BTW, a vibrating tool (such as the Multi-Max) can make grout and thinset removal much easier. Since there's probably a floor crack under the tile, use a mortar with flexible additives that can absorb some further shifting in the floor (such as thermal expansion).

  35. wsvitak says:

    Thanks for the vid basic and quick but informative

  36. Gainesvilleroofing says:

    thanks for the cracked tile tutorial

  37. Ali Haneef says:

    awesome, thanks for this awesome tutorial man!! its really nicely done.. hey check this out for another awesome home improvement service video.. they are really good.

    ==> [youtube.com/watch?v=PRCiI4NKbIE]

  38. Gainesvilleroofing says:

    Thanks for the tile info

  39. claudia aholelei says:

    thanks for an easy way to do this, feeling confident now thanks!!

  40. matureatlboy1 says:

    thanks for posting this!! it's a great help……BTW you are so cute!!

  41. Terry Hollas says:

    what, no sealant?

  42. Simon Sanchez says:

    Looking for mortgage field solutions & services ! We are in the mortgage field service industry for a number of years, developing an impressive set of skills in many areas.
    We can handle all of your data entry needs related to Field Services and we are experienced with Bank of America, SafeGuard, Core Logic and LPS work orders.

    Please call us at : (562)472-2290 or browse mortgagefieldsolutions.kom
    for details. You can watch this video to get a fair idea.

  43. Larry Grace says:

    nice instructions. thanks !

  44. Ian Clark says:

    anything you could use instead of a "grout remover"? i don't have that tool

  45. zcarenow says:

    my ceramic tiles have buckled or come loose after 8 yrs in my house…i need to reseal and grout it again, so i guess i wouldn't use the hammer to break the tile to pieces like the video, but carefully pry it out since the grout around it has come loose. did u use the pry bar to scrape off the old thinset? don't u also need a grout sealer after putting in grout? i have 8 tiles to reseal and another 2 tiles that are actually cracked, but home depot doesnt have same tiles, so i need to reuse them.

  46. zcarenow says:

    so the 2 tiles that are cracked, is there a way to glue the cracked parts and reuse the tile since home depot said they dont have the same tile with same thickness. also how come i didn't see the video use spacers. can someone give more detail? thanks.

  47. Max Dangerfield says:

    Not only safety glasses but gloves and long sleeves are good too. I was careless and got a nasty ceramic splinter in my thumb from the second strike of the hammer. Thank goodness it was not my eye.

  48. David Sequeira says:

    This is a good solid, SIMPLE video. Thats a plus. There are a lot of confusing videos out there for people that have never replaced a tile before. This video shows how easy it is to replace a tile. Great job!

  49. Brett Heath says:

    look at your name. you have no hope

  50. llll says:

    Much love on video. Short, sweet and all questions answered.

  51. Julie Daniels says:

    Great video! Makes it look simple!

  52. John Herring says:

    Fantastic. Thanks so much for the time and effort in making this vid.

  53. eheinze says:

    Very misleading video. No way is it that easy to remove the grout, which must be completely removed before using a hammer, especially if you are only removing one or two tiles and tying to damaging adjacent tiles.

  54. KumuKelena says:

    Excellent video!! Thank. I have the confidence to do this now. Much appreciated. Will have to figure out how to do the color matching for the grout.

  55. gbh8025 says:

    Ryan Parker. You Sir is fine!!! If you ever need a extra hand. Just let me know. I'm only a short seven and a half hour drive away. M4M

  56. Scott C. Johnson. says:

    Very informative

  57. jedikitty says:

    Thank you for this fine video that enabled me to finally fix that ugly broken tile in my kitchen floor. One thing I wasn't sure about was the drying time (of the adhesive) before grouting around the new tile; the adhesive's instruction said to wait 24 hrs. I did that, then re-grouted. Looks and feels great. Another thing I'm very grateful about is you Sir just saved me a small bundle, as I didn't have to hire someone to do this tile job for me! ๐Ÿ™‚

  58. Nate650 says:

    Hehe, I had the same concern. It looks like the grout in the video was already worked on. If it ends up not being that easy, you can use a Dremel-type tool with a grout attachment.

  59. AlphaZorks says:

    Sweet! I just rage smashed a mug and cracked a tile. Now I can fix it for cheap.

  60. YaoiKing69 says:

    Wow, thanks!! This help me out a lot. ๐Ÿ˜€

  61. Cali Love0713 says:

    He is super cute ๐Ÿ™‚

  62. โ˜†I Hope My Neighbor Likes This Songโ˜† says:

    Is it possible to use a Stanley knife to remove grout?

    and a paper scrapper to remove tile adhesive?

  63. Dee Gee says:

    Thanks for the video! I just inspected one of my rental properties and found 6 cracked tiles. I was going to sub it out but it's too small a job for a tile person. I'll do it myself thanks to your vid!

  64. LaStyleful says:

    good job i.fukd up sum tile at work. you help me to look like a pro after i ran to the bathroom to watch this. thanks alot

  65. Timefliesbye says:

    Damn straight wear glasses!

    A tile shard killed my daddy! Damn you Stanley D. Stookely for inventing ceramics!

    A tip for taking out tiles. Start in the centre. Drill four holes take a chisel and set it in one of the holes and hammer towards another of the holes. This way you can easily get out a square piece and then work outwards towards removing the rest of the tile.

    Minimizes risk of having to replace yet another tile you accidentally scratched.

  66. nogard144 says:

    Don't be fooled by watching this video into thinking the removal of thinset is a piece of cake. I'm literally replacing 3 18×18" tiles, removing the thinset by hand with a hammer and a wood chisel, and it is extremely laborious to say the least. Gives me a whole new respect for guys who lay tile for a living, and I'm no slouch. Next time I'll stick to hiring the experts. This video, while informative, is misleading.

  67. BlancoChoco Taco says:

    do you know whatย  model number and name of those tile they look very similar to the ones I need to replace. thanks

  68. Mark Igolnikov says:

    Good video. plain and simple.
    Thank You

  69. wayne lynch says:

    Good video. Easy instructions and no annoying background music, screaming kids, barking dogs etc:)

  70. area859 says:

    Can you basically do this to an entire kitchen floor…just break the old tile and replace with new tile without laying new backer board down?

  71. Scott Laperriere says:

    Great video! I just started a maintenance job and youtube has been helping me a lot! Your video makes it look very easy!

  72. Gigawatt Graphics says:

    What if there is no concrete below the tiles, just wood boards, same technique? Is the lack of cement board part of the reason why it would crack?

  73. danteshammer says:

    huh. doesnt seem so hard. so then why did my landlord charge me 200 for replacing 3 tiles after i left?

  74. slay1122 says:

    Thanks

  75. Gin Amber says:

    This looks so easy, we did with my husband and nothing, tiles next day collapsed, nobody stepped on this, tried second time, still the same, not sure what's wrong, we spend a lot of money and supplies and at the end we still got to hire remodeling person to change it. Not so easy at it looks in the video, believe me.

  76. William K says:

    Thanks. That easy. I looked at yours because it was the only video under 15 minutes. Who has 15+ minutes to spend learning how to fix a tile. ๐Ÿ™‚
    Nice video.

  77. Maynard says:

    Never in my days as a carpenter have I seen old grout & a tile come up so easy.

  78. RetroSteveUK says:

    Thank you. Was a mystery to me. Turns out it's surprisingly simple! Nice, short instructional video. Others I've found were 20 minutes plus. Good job!

  79. Sajjad Mehal says:

    Thank you Ryan, you should have your own TV SHOW ๐Ÿ™‚

  80. ptrick213 says:

    This dude seems like the nicest dude.

  81. KrisFlix says:

    How to you ensure the new grout will match the old grout? A tile floor that is a few years old will have grout that is faded over time. The new grout will be noticeable in color, right?

  82. Fattrac says:

    Great video. Thanks for posting!

  83. geeksgadgetsgames says:

    Thanks!

  84. Garry Gemmell says:

    Never lever against another tile thats just a recipe for chipping it!

Leave a Reply

Your email address will not be published. Required fields are marked *