How to Paint Stripes on Your Walls : How to Measure for Painting Stripes on a Wall
How to Paint Stripes on Your Walls : How to Measure for Painting Stripes on a Wall

Hello my name’s Melissa Schenk and on behalf
of Expert Village, today we’re going to teach you how to paint a room with stripes. In this
clip it’s time now to do some math. Math might not be for everyone but in this case we need
to do and work with some numbers. So what you first need to think about, you can see
behind me we have started to stripe the walls, but we’ll get to that in later clips I need
to first teach you how to get to that point by doing the math. Stripes are usually anywhere
from between four to ten inches wide. Some people go twelve inches, it’s entirely up
to you but standard, normally, four to ten inches seems to be the norm. So, let’s for
instance say that you chose six or eight inches, we’ll say six inches. What you could do, a
couple of different options, is get yourself a piece of paper and start writing all of
the numbers out that correspond with the number six for instance the next in sequence would
be twelve, after that would be eighteen, then twenty-four. You want to keep increasing your
denominations in increments of six because if you’re either using a level or a measuring
tape what you need to do is start on one end of your wall and you’re going to start to
measure out. Now you can do that like six, twelve, eighteen, twenty-four, or if you don’t
like that and you want to use a little ruler even, what you need to do, a couple of different
things, the first to remember and to start of with is to, you’re probably going to need
to get on a ladder and go to the top part of your wall, use a pencil, don’t put any
really heavy marks on your wall. You just want a little hash mark so that later when
you are using either your level or your laser level, you’re going to be able to go back
and make your measurement. So in this case, what we’ve done here is we have used an eight
inch. I opted for this room to go eight inches apart. So what I did was, we put on the wall
eight inches, marked it, then moved it out another eight inches. Again, if you’re using
a tape measure, you can go eight, sixteen and so on and so forth. So the first thing
you need to do is get your ladder, get a pencil, your ruler, measuring tape or level, mark
the numbers on the wall and figure out how many inches apart you want those stripes to
be. That is the first part of this. You got to get those done and I’ll see you in the
next clip.

1 thought on “How to Paint Stripes on Your Walls : How to Measure for Painting Stripes on a Wall”

  1. Deerector says:

    One thing that still wasn't explained was how to deal with the corners. Let's say u chose 8" stripes, u get to the corner and there's only 7" left. Now what? And if u did just continue with that method and did the left over 1" on the next wall, what happens when are all the way around the room at where u started and on ur last stripe u only have 4" left? So this method is flawed. Anyone have suggestions?

Leave a Reply

Your email address will not be published. Required fields are marked *